- All Sections
- content: Hardware (14)
|
There are no translations available.Caratteristiche tecniche principali (fonte: sito Signum.com) • Wide range of µP pods to emulate virtually all 8051 family members from Atmel, Dallas, Infineon, Intel, OKI, NXP (Philips), Teridian (Maxim), Texas Instruments and Winbond • Real time transparent emulation up to 60 MHz • HLL debug for C-51, PL/M-51 and ASM-51 • Up to 256K of overlay Program RAM with bank switching • Up to 64K of overlay External Data RAM • Memory (Code and Xdata) display and edit while executing in real-time • In-line symbolic assembler and disassembler • Memory mapping (User or ICE) on 256 byte boundaries • Up to 256K of real-time hardware breakpoints which work in RAM, ROM, EPROM and Flash • 32K frames (80 bits wide) of execution Trace Buffer with time stamp on each executed instruction and selective tracing • Trace display during execution • Pass-points to monitor IRAM, locals and SFRs while running • Breakpoints on Register and internal RAM values • Complex Events to trigger Breakpoints or Trace logic • Two 16 bit Pass Counters for breakpoints and trace control • 8 level hardware event Sequencer for breakpoints and trace control •8 channel user logic state analyzer to display misc. signals in trace • All Complex Events can trigger external Logic Analyzers and Scopes • External Break input to stop the CPU from external sources • Performance Analysis with histograms for execution speed analysis • Execution Profiling with bar graph for function frequency analysis • Coverage Analysis with source tagging and report of unexecuted code • Windows 2000 / NT4 / 98 / ME / XP user interface • Serial or parallel port interface to the host PC • Remote debugging over TCP/IP network
There are no translations available.
Probe BDM per i core Freescale ColdFire
There are no translations available.
Emulatore JTAG per i DSP Texas Instruments delle famiglie TMS-C2000, C5000 e C6000.
There are no translations available.J-Link ULTRA è il nuovo emulatore JTAG/SWD per i core ARM7/ARM9/ARM11/Cortex-M. E' compatibile con il J-Link standard del quale rappresenta l'evoluzione tecnologica. Tuttavia, è molto più veloce del J-Link grazie a una CPU più potente, alla FPGA integrata e alla connessione USB high-speed.Connesso e alimentato tramite la porta USB, supporta Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista e Windows 7.
There are no translations available.
Dopo il successo dell'emulatore JTAG ultracompatto J-Link per ARM e per ColdFire, Segger ha rilasciato il supporto per l'architettura Renesas RX. Per supportare il core RX basta possedere un J-Link e dotarsi dell'adattatore 20-pin/14-pin. Il software può essere scaricato gratuitamente dal sito della Segger.
There are no translations available.
emulatore JTAG per TI Da Vinci, OMAP 34xx, OMAP 35x
There are no translations available.
emulatore JTAG per TI OMAP
There are no translations available.
Emulatore JTAG con supporto per ETM (Embedded Trace Macrocell) per il core Cortex-M3
There are no translations available.
Emulatore JTAG/SWD che oltre alle caratteristiche di J-Link include l'interfaccia fast ethernet
There are no translations available.
Emulatore JTAG con supporto per ETM (Embedded Trace Macrocell) per ARM7/ARM9
There are no translations available.
emulatore JTAG per ARM7/9/11/XSCALE/Cortex-M3
There are no translations available.
Probe Optoisolato per J-Link e Flasher-ARM. Separazione galvanica del target dai tool di debug tramite optoisolatori.
There are no translations available.
Emulatore JTAG per DSP Texas Instruments TMS-C2000 con probe optoisolato (JTAG standard 14 pin) e interfaccia USB2.0.
There are no translations available.
Emulatore JTAG/SWD per ARM7/9/11/Cortex-M3 con connessione USB2.0 e cavo standard JTAG 20 pin |
